Avaliação de soluções antifúngicas de guanidina para resina base de dentadura: um estudo in vitro

Autores

  • Maria Eduarda Rodrigues Gama Universidade Federal do Rio Grande do Sul
  • Vicente Castelo Branco Leitune Universidade Federal do Rio Grande do Sul
  • Isadora Martini Garcia Universidade Federal do Rio Grande do Sul
  • Stéfani Becker Rodrigues Universidade Federal do Rio Grande do Sul
  • Fabrício Mezzomo Collares Universidade Federal do Rio Grande do Sul

DOI:

https://doi.org/10.22456/2177-0018.104096

Palavras-chave:

Resinas acrílicas, Antifúngicos, Candidíase, Guanidina, Dentaduras

Resumo

Antecedentes: Os objetivos deste estudo foram: (1) formular soluções de cloridrato de polihexametileno guanidina (PHM-GH) em diferentes concentrações; (2) avaliar sua atividade antifúngica contra biofilme maduro de Candida albicans em resinas acrílicas; (3) avaliar efeitos na resistência à flexão e rugosidade da superfície. Métodos: Soluções de PHMGH foram formuladas com água destilada e 0,125, 0,250 ou 0,5% em peso de PHMGH. Um grupo sem PHMGH foi usado como controle. Para análise da atividade antifúngica, amostras de resina acrílica foram contaminadas com C. albicans, e imersas em soluções de PHMGH ou água destilada por 5 ou 10 min. Resistência à flexão final e rugosidade da superfície foram avaliadas. Resultados: Todas as soluções de PHMGH aos 5 ou 10 minutos apresentaram atividade antifúngica em comparação ao grupo controle (p <0,05). O grupo com 0,5% em peso de PHMGH não mostrou colônias contáveis, independentemente do tempo. Após 10 minutos, todas as soluções de PHMGH tiveram efeito antifúngico sem diferenças de 0,125 a 0,5% em peso de PHM-GH. Os grupos apresentaram alta resistência à flexão após o contato com as soluções compatíveis com a recomendação ISO 20795-1: 2013. Os valores de rugosidade da superfície permaneceram baixos, de 0,01 a 0,04 μm para todos os grupos. Conclusão: Dentro das limitações deste estudo, concluiu-se que o uso de uma solução composta por água destilada e 0,5% em massa de PHMGH por 5 min foi eficaz como agente desinfetante contra o biofilme maduro de C. albicans, mantendo rugosidade e resistência à flexão aceitáveis.

Downloads

Não há dados estatísticos.

Biografia do Autor

Fabrício Mezzomo Collares, Universidade Federal do Rio Grande do Sul

Mestre em Odontologia, Doutorado em Odontologia, com experiência em avaliação de materiais dentários, desenvolvimento de polímeros e materias restauradores.

Referências

Dagistan S, Aktas AE, Caglayan F, Ayyildiz A, Bilge M. Differential diagnosis of denture-induced stomatitis, Candida, and their variations in patients using complete denture: a clinical and mycological study. Mycoses. 2009;52(3):266-71.

Kamonkhantikul K, Arksornnukit M, Takahashi H. Antifungal, optical, and mechanical properties of polymethylmethacrylate material incorporated with silanized zinc oxide nanoparticles. Int J Nanomedicine. 2017;12:2353-60.

Figueiral MH, Azul A, Pinto E, Fonseca PA, Branco FM, Scully C. Denture-related stomatitis: identification of aetiological and predisposing factors - a large cohort. J Oral Rehabil. 2007;34(6):448-55.

Wilke M, Grube R. Update on management options in the treatment of nosocomial and ventilator assisted pneumonia: review of actual guidelines and economic aspects of therapy. Infect Drug Resist. 2013;7:1-7.

O'Donnell LE, Smith K, Williams C, Nile CJ, Lappin DF, Bradshaw D, et al. Dentures are a reservoir for respiratory pathogens. J Prost. 2016;25(2):99-104.

Schwendicke F, Stolpe M, Muller F. Professional oral health care for preventing nursing home-acquired pneumonia: a cost-effectiveness and value of information analysis. J Clin Periodontol. 2017;44(12):1236-44.

van der Maarel-Wierink CD, Vanobbergen JN, Bronkhorst EM, Schols JM, de Baat C. Oral health care and aspiration pneumonia in frail older people: a systematic literature review. Gerodontology. 2013;30(1):3-9.

Fernandes FH, Orsi IA, Villabona CA. Effects of the peracetic acid and sodium hypochlorite on the colour stability and surface roughness of the denture base acrylic resins polymerised by microwave and water bath methods. Gerodontology. 2013;30(1):18-25.

Quirynen M, Bollen CM. The influence of surface roughness and surface-free energy on supra- and subgingival plaque formation in man. A review of the literature. J Clin Periodontol. 1995;22(1):1-14.

Faot F, Cavalcanti YW, Bertolini MM, Pinto LR, Silva WJ, Del Bel Cury AA. Efficacy of citric acid denture cleanser on the Candida albicans biofilm formed on poly(methyl methacrylate): effects on residual biofilm and recolonization process. BMC Oral Health. 2014;14(77):1-7.

Pawashe KG, Tewary S, Sanyal PK, Nilesh K. An in vitro comparative evaluation of disinfectants on standard and clinical microbial strains on heat cure resins. J Clin Diagn Res. 2017;11(5):ZC54-ZC58.

Amin F, Rehman A, Abbas M. Microhardness of heat cure acrylic resin after treatment with disinfectants. J Pak Med Assoc. 2015;65(8):834-7.

Paranhos Hde F, Peracini A, Pisani MX, Oliveira Vde C, de Souza RF, Silva-Lovato CH. Color stability, surface roughness and flexural strength of an acrylic resin submitted to simulated overnight immersion in denture cleansers. Braz Dent J. 2013;24(2):152-6.

Somkuwar S, Mishra SK, Agrawal B, Choure R. Comparison of the flexural strength of polymethyl methacrylate resin reinforced with multiwalled carbon nanotubes and processed by conventional water bath technique and microwave polymerization. J Indian Prosthodont Soc. 2017;17(4):332-9.

Collares FM, Rostirolla FV, Macêdo EOD, Leitune VCB, Samuel SMW. Influence of mouthwashes on the physical properties of orthodontic acrylic resin. Braz J Oral Sci. 2014;13:203-8.

Goiato MC, Dos Santos DM, Andreotti AM, Nobrega AS, Moreno A, Haddad MF, et al. Effect of beverages and mouthwashes on the hardness of polymers used in intraoral prostheses. J Prosthodont. 2014;23(7):559-64.

Lee HH, Lee CJ, Asaoka K. Correlation in the mechanical properties of acrylic denture base resins. Dent Mater J. 2012;31(1):157-64.

Aviv O, Amir N, Laout N, Ratner S, Basu A, Domb AJ. Poly(hexamethylene guanidine)-poly(ethylene glycol) solid blend for water microbial deactivation. Polym Degrad Stabil. 2016;129:239-45.

Choi H, Kim K-J, Lee DG. Antifungal activity of the cationic antimicrobial polymer-polyhexamethylene guanidine hydrochloride and its mode of action. Fungal Biology. 2017;121(1):53-60.

Oulé MK, Azinwi R, Bernier A-M, Kablan T, Maupertuis A-M, Mauler S, et al. Polyhexamethylene guanidine hydrochloride-based disinfectant: a novel tool to fight meticillin-resistant Staphylococcus aureus and nosocomial infections. J Med Microbiol. 2008;57(12):1523-8.

Oule MK, Quinn K, Dickman M, Bernier AM, Rondeau S, De Moissac D, et al. Akwaton, polyhexamethylene-guanidine hydrochloride-based sporicidal disinfectant: a novel tool to fight bacterial spores and nosocomial infections. J Med Microbiol. 2012;61(Pt 10):1421-7.

Zhou Z, Wei D, Lu Y. Polyhexamethylene guanidine hydrochloride shows bactericidal advantages over chlorhexidine digluconate against ESKAPE bacteria. Biotechnol Appl Biochem. 2015;62(2):268-74.

Garcia IM, Rodrigues SB, Leitune VCB, Collares FM. Antibacterial, chemical and physical properties of sealants with polyhexamethylene guanidine hydrochloride. Braz Oral Res. 2019;33:1-9.

Collares FM, Garcia IM, Bohns FR, Motta AdSd, Melo MA, Leitune VCB. Guanidine hydrochloride polymer additive to undertake ultraconservative resin infiltrant against Streptococcus mutans. Eur Polym J. 2020;133:109746.

Garcia IM, Rodrigues SB, Rodrigues Gama ME, Branco Leitune VC, Melo MA, Collares FM. Guanidine derivative inhibits C. albicans biofilm growth on denture liner without promote loss of materials' resistance. Bioact Mater. 2020;5(2):228-32.

Choure RB, Sthapak A, Yadav NS, Srivastava T, Ali SS, Dixit S. Effect of alcohol and tea on solubility of soft-liner and polymethyl methacrylate resin: an in vitro study. J Contemp Dent Pract. 2019 Jan;20(1):83-8.

Lima JFM, Maciel JG, Hotta J, Vizoto ACP, Honório HM, Urban VM, et al. Porosity of temporary denture soft liners containing antifungal agents. J Appl Oral Sci. 2016;24(5):453-61

Kreve S, Dos Reis AC. Denture liners: a systematic review relative to adhesion and mechanical properties. ScientificWorldJournal. 2019;2019:6913080.

Moura JS, da Silva WJ, Pereira T, Del Bel Cury AA, Rodrigues Garcia RC. Influence of acrylic resin polymerization methods and saliva on the adherence of four Candida species. J Prosthet Dent. 2006;96(3):205-11.

International Organization for Standardization (ISO). Dentistry-base polymers:20795-1:2013.2013:1-35.

Park K. An analysis of a humidifier disinfectant case from a toxicological perspective. Environ Health Toxicol. 2016;31:e2016013.

Koo H, Andes DR, Krysan DJ. Candida–streptococcal interactions in biofilm-associated oral diseases. PLoS Pathog. 2018;14(2):e1007342.

Souza JGS, Bertolini M, Thompson A, Mansfield JM, Grassmann AA, Maas K, et al. Role of glucosyltransferase R in biofilm interactions between Streptococcus oralis and Candida albicans. ISME J. 2020;14(5):1207-22.

Bowen WH, Burne RA, Wu H, Koo H. Oral Biofilms: Pathogens, Matrix, and Polymicrobial Interactions in Microenvironments. Trends Microbiol. 2018;26(3):229-42.

Sharma P, Garg S, Kalra NM. Effect of denture cleansers on surface roughness and flexural strength of heat cure denture base resin-an in vitro study. J Clin Diagn Res. 2017;11(8):ZC94-7.

Glauser S, Astasov-Frauenhoffer M, Muller JA, Fischer J, Waltimo T, Rohr N. Bacterial colonization of resin composite cements: influence of material composition and surface roughness. Eur J Oral Sci. 2017;125(4):294-302.

Downloads

Publicado

2020-12-30

Como Citar

Gama, M. E. R., Leitune, V. C. B., Garcia, I. M., Rodrigues, S. B., & Collares, F. M. (2020). Avaliação de soluções antifúngicas de guanidina para resina base de dentadura: um estudo in vitro. Revista Da Faculdade De Odontologia De Porto Alegre, 61(2), 39–49. https://doi.org/10.22456/2177-0018.104096

Edição

Seção

Artigos originais